PRESTO! PRO FILL
PROFILL™ was developed specifically for Paint & Body Repair Professionals. PROFILL™ is a heavy duty filler and sealer designed for most outdoor plastic surfaces. PROFILL™ was originally developed to seal and stabilize gelcoat on fiberglass boats used in tropical and sub-tropical climates but was found to have many other uses as well. PROFILL™ used on on cars, boats, RV’s and most outdoor plastics - except latex.
In addition to rejuvenating, sealing and stabilizing plastic surfaces, use PROFILL™ on clearcoat scratches that are deep enough that you can catch a fingernail on. This product is colorless and does not replace or repair missing or damaged color. PROFILL™ has enough body to keep from running out of vertical scratch grooves and can be applied using professional “squeegee techniques.” Buff or wet sand as needed to correct imperfect application technique.
Typical cure time in full sunlight at 80oF is 1 hour. Overcast and colder temperatures will extend cure time. Cure times of 1 minute are possible with UV lamps used for windshield repairs. Typical coverage is 100 Sq. Ft. per US. Fl. Oz. This product is recommended as a heavy duty primer and sealer for PRESTO! PRO PBR™.
PROFILL™ can also be used for:
• Sealing, Filling, Stabilizing and Rejuvenating Severely Faded, Weathered or Oxidzed Surfaces Such As: |
- Clearcoats
|
- Waterborne Clearcoat |
- Vintage Car Paints
|
- Exposed Colorcoat |
|
|
• Sealing, Filling, Stabilizing and Rejuvenating Moderately Faded, Weathered or Oxidzed Surfaces Such As: |
- Clouded Headlights
|
- Fiberglass |
- Gelcoat
|
- TPO Bumpers & Fenders |
- Polycarbonate
|
- Laminates |
- PVC
|
- Vinyl |
|
|
• Extending PRO PBR™ Coverage When Used as a Primer |
PRODUCT Directions for PRO FILL™
These product have the same appication directions. They differ in that PROFILL™ can be applied using professional “squeegee techniques.” These products are self levelling and should be applied at temperatures above 55o F. Protect these products from freezing by storing them above 32o F. PROTECT CONTENTS from sunlight! NEVER pour these products directly onto the work surface because they may harden before you expect it.
1. Wash & dry the surface. Wash the surface with soap and water. Allow the surface to dry completely before applying the product. Wax remover is strongly recommended on gelcoat surfaces. We recommend using PRESTO! Wax-OFF™ which is a solvent free wax and oxidation remover that eliminates as much as 75% of the buffing needed to get high gloss results.
2. Shake bottle before using. Apply the product in the morning while UV levels are low, or apply in the shade, or apply the product in the shadow of your body. Using disposable plain paper towels lightly apply these products by hand. DO NOT RUB because paper towels can scratch surfaces. As the towel starts to harden with product, dispose of the towel or wrap a new towel around the old one. Dispose of towels as needed as non-hazardous, solid waste. Protect surface from dirt & water until dry to the touch. If you have problems call customer support at 440-773-4189.
Order NOW! |